BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld
BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld
BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld
BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld
BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld

BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld

BETOOLL HW9003 Argon CO2 Mig Tig Flow meter Gas Regulator Gauge Welding Weld

$26.00

  • Model: B01I67VKFW
Description:

    This fits your .
  • Make sure this fitsby entering your model number.
  • Brand New BETOOLL Argon / CO2 / Helium regulator and flow meter.
  • Flow Meters are more accurate than the flow gauge regulators.
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators.
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.
Style:Argon/CO2 Flow Meter Regulator

100% Brand New.
Color: Gold
Material: Copper
Size: 12cm(L)*7.5cm(W)*16CM(H)
Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement

Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.

The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those.

A very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.

Package Content: 1 x Argon CO2 Flow meter

Copyright © 2004-2014. Powered by www.samgoodchild.com